Items that are used in connection of UPS. For example network cards, communication leads, rail sets, and electrical connection cables.
Subcategories
Cell packs that can be connected to UPS to increase their runtime.
Regulates input voltages. Usually inductor based which gives mains isolation.
Front Plastic / Fascia for UPS
Lan cards for various UPS.
Various modules for UPS, example Power and Battery Modules
Power Distribution Units
Services for collections
1x Pair of generic rails that will mount a UPS. **They must be ordered with the UPS you intend to use them with.** We will make sure that the rails fit the UPS you order. We supply with the nuts and bolts needed for most racks.
1x Pair of generic rails that will mount a UPS. These are for heavy UPS over 60KG **They must be ordered with the UPS you intend to use them with.** We will make sure that the rails fit the UPS you order. We supply with the nuts and bolts needed for most racks.
HP af410a nic - used- working Reset to manufacturers defaults
HP R6000 Electronics module fully working Easy to install, you need to connect 3x wires from your UPS to the module - ringed in green on our photos.
IEC309 male (to plug into the wall power) c19 Female (to plug into the UPS)
We have stock of both the power modules and the UPS. So we can fully test them before we ship. Fully tested and fully working power module. We also have the UPS / Chassis / Cell packs. Inquire if needed. **30 day RTB Warranty with this item**
Used but fully working. 12m RTB Warranty. Reset to manufacturer defaults. Reset to DHCP handshake Reset login credentials
Riello UPS Networking card Reset to defaults We require a static IP/Mask/GW to pre configuire the card to
Upgraded SnapRails. Must be ordered at the same time as a UPS. We weld extension plates on the bottom of the rail L-section to better support the UPS. Suggested weight limit 60KG. Depth Min 74cm to Max 95cm
**Must be ordered at the same time as a UPS.** These are for 1U UPS like the SUA750rmi1u. We weld extension plates on the bottom of the rail L-section to better support the UPS. Without that the L-section bottom is often not enough to hold the UPS. We test them in our rack. We supply all of the nuts and bolts to attach the rails to your rack. Suggested...
EBM cell pack to increase runtime of SUM3000rmxli2u 12m RTB warranty
Tested in a UPS. 90 Day RTB warranty. For use in the Symmetra PX UPS systems
Tested in a UPS. 90 Day RTB warranty. For use in the Symmetra PX UPS systems
Tested in a UPS. 90 Day RTB warranty. For use in the Symmetra PX UPS systems. Q revision - updated and backward compatible version of the standard SPYM10KH
We have stock of both the power modules and the UPS. So we can fully test them before we ship. 30 Day RTB warranty Fully tested and fully working SYPM2KU power module For use in the Gen2 Symmetra APC UPS systems
We have stock of both the power modules and the UPS. So we can fully test them before we ship. 90 Day RTB warranty Fully tested and fully working SYPM4Ki power module For use in the Gen2 Symmetra APC UPS systems
Tested in a UPS. 90 Day RTB warranty. For use in the Symmetra PX UPS systems.
-----[ UPS-Trader ]---------
15 Grosvenor Grange / Warrington / WA1 4SF
Email: shop@ups-trader.co.uk