APC AP8953 G2 Masterswitch PDU - 32A

AP8953

Refurbished

Masterswitch PDU - individual sockets can be powered on an off.
Generation 2 - LCD control panel.
Staggered start.

Input IEC309-32A type (Blue commando Male)

Outputs
21x C13 output sockets
3x C19 output sockets

Reset to defaults (username and password apc/apc)

We offer an optional firmware upgrade service for these PDU. Order below if needed.


Firmware upgrade link

More details

£ 180.00 tax incl.

Rack PDU 2G, Switched, ZeroU, 32A, 230V, (21) C13 & (3) C19 

Input Connection IEC309-32A (blue commando) male plug
Nominal Input Voltage 200V , 208V , 230V 240VAC

Overload Protection Yes
Maximum Total Current Draw 32 Amps 

Output Connections 
3x IEC 320 C19  
21x IEC 320 C13 


Maximum Height 182.9 cm 
Maximum Width 5.6 cm 
Maximum Depth 4.6 cm 
Net Weight 7.59 kg 

We have experience shipping these internatinally.



APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. 

Remote outlet level controls allow power on/off functionality for power recycling to remotely reboot equipment and restrict unauthorized use of individual outlets. 

Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. 

Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and low profile circuit breakers. 

User-defined alarms warn of potential circuit overloads before critical IT failures occur. 

Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager. 


No customer reviews for the moment.

Write a review

APC AP8953 G2 Masterswitch PDU - 32A

APC AP8953 G2 Masterswitch PDU - 32A

Masterswitch PDU - individual sockets can be powered on an off.
Generation 2 - LCD control panel.
Staggered start.

Input IEC309-32A type (Blue commando Male)

Outputs
21x C13 output sockets
3x C19 output sockets

Reset to defaults (username and password apc/apc)

We offer an optional firmware upgrade service for these PDU. Order below if needed.


Firmware upgrade link

30 other products in the same category: