AP7822

AP7822

Refurbished

2U PDU, fully tested and working.

We reset the PDU to manufacturers defaults.

They are set to assign an IP via DHCP / BootP handshake.
The username and passwords are reset to known values.

1x IEC309-32A (large blue commando plugs) input. Single Phase
12x IEC C13/15 (small kettle / d-plug sockets) as output.
4x IEC19/20 (large square) output sockets

2x disparate circuits of 16A

More details

£ 188.34

Nominal Output Voltage 230V
Overload Protection Yes
Maximum Total Current Draw 32

Output Connections
(4) IEC 320 C19 (Battery Backup)
(12) IEC 320 C13 (Battery Backup)


Nominal Input Voltage 200V , 208V , 230V
Input frequency 50/60 Hz
Input Connections IEC 309 32A 2P+E
Cord Length 3.66 meters
Maximum Input Current 32 A

Physical

Maximum Height 88 , 8.8 cm
Maximum Width 444 , 44.4 cm
Maximum Depth 112 , 11.2 cm
Rack Height 2 U
Net Weight 3.36 kg 

 
Remote Management Capabilities
Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.
Local Current Monitoring Display
The aggregate current draw per rack PDU is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. (Available on designated SKUs only)
Alarm Thresholds
Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems. (Note: Only available on units with the current monitoring capabilities. Please see SKU specifications for availability)
Load indicator LED
Indicates overload and warning conditions based on the user-defined alarm thresholds. Alerts users of potential overloaded circuits.

No customer reviews for the moment.

Write a review

AP7822

AP7822

2U PDU, fully tested and working.

We reset the PDU to manufacturers defaults.

They are set to assign an IP via DHCP / BootP handshake.
The username and passwords are reset to known values.

1x IEC309-32A (large blue commando plugs) input. Single Phase
12x IEC C13/15 (small kettle / d-plug sockets) as output.
4x IEC19/20 (large square) output sockets

2x disparate circuits of 16A

30 other products in the same category: