No products
Prices are tax included
Other
Other There are 63 products.
Items that are used in connection of UPS. For example network cards, communication leads, rail sets, and electrical connection cables.
Subcategories
Add on battery packs
Cell packs that can be connected to UPS to increase their runtime.
Automatic Voltage...
Regulates input voltages. Usually inductor based which gives mains isolation.
Front plastics
Front Plastic / Fascia for UPS
Network Cards
Lan cards for various UPS.
Modules
Various modules for UPS, example Power and Battery Modules
PDU
Power Distribution Units
Collection
Services for collections
Rackmount Rails
Rails for securing rack UPS in Racking systems.
Pedestal UPS
Pedestal UPS for use on the floor / under desks. Often have wall mount holes.
Software
UPS related software / tools
ATS
Automatic Transfer Switches
MainBoards / Components
Sub components / boards for UPS.
£ 1.30 In Stock1.5 M C13-C14 (Male to Female) hot to cold...
1.5M 10A C13 to c14 (male to female) lead for plugging devices into your UPS. Simply connect this to the UPS and then plug it into your device
£ 1.30In Stock
£ 1.30 In Stock1M C13-C14 (Male to Female) hot to cold cable
1M 10A C13 to c14 (male to female) lead for plugging devices into your UPS. Simply connect this to the UPS and then plug it into your device
£ 1.30In Stock
£ 28.27 In Stock940-0024E - APC 2-Metre SMART-UPS...
Condition: UsedOriginal APC 940-0024E SMART-UPS Signaling Interface Cable.Circa 2m long.
£ 28.27In Stock
£ 26.50 In Stock940-0103 - Original APC 2-Metre Data...
Condition: UsedOriginal APC 940-0103 data transfer cable.Circa 2m long.
£ 26.50In Stock
£ 29.44 In Stock940-0266 APC 2-metre Serial to RJ45...
Condition: UsedOriginal APC 940-0266 RJ47 to serial communications cable.Circa 2m long.
£ 29.44In Stock
£ 19.48 In Stock
£ 380.00 In StockAP4421 ATS
Automatic transfer switch 2x IEC13/14 inputs8x IEC 13/14 output sockets. Max power 10A. Used, but tested and fully working. Reset to manufacturers defaults by us. This includes resetting the network card to handshake with DHCP for an IP address.
£ 380.00In Stock
£ 395.96 In StockAP4423 ATS
Automatic transfer switch 2x C19/20 type inputs 8x IEC 13/14 output sockets. Max power 16A. Used, but tested and fully working. Reset to manufacturers defaults by us. This includes resetting the network card to handshake with DHCP for an IP address.
£ 395.96In Stock
£ 20.00 In StockAP6022 PDU
A simple 16a PDU power distribution unit - no reackmount ears 1x C19/20 input 11x C13/14 output
£ 20.00In Stock
£ 185.00 In StockAP7721 ATS
Automatic transfer switch - C13 input/outputs - 1400VA Used, but tested and fully working. Reset to manufacturers defaults by us.
£ 185.00In Stock
£ 210.00 In StockAP7722 ATS
Automatic transfer switch - 2x IEC309 16A inputs 1x IEC 309-16A output. Max power 16A. Used, but tested and fully working. Reset to manufacturers defaults by us. This includes resetting the network card to handshake with DHCP for an IP address.
£ 210.00In Stock
£ 158.54 In StockAP7822
2U PDU, fully tested and working. We reset the PDU to manufacturers defaults. They are set to assign an IP via DHCP / BootP handshake.The username and passwords are reset to known values. 1x IEC309-32A (large blue commando plugs) input. Single Phase12x IEC C13/15 (small kettle / d-plug sockets) as output.4x IEC19/20 (large square) output sockets 2x...
£ 158.54In StockAP7854 PDU
Input socket is an IEC309-16A type 20x C13 output sockets4x C19 output sockets Reset to defaults (username and password apc/apc) Note the Zero-U mounting Pips and Cable tidy L-brackets are not included as standard. If we have any in stock we can supply free of charge at customer request. 12m RTB warranty
£ 73.36 £ 83.36In Stock
£ 177.14 In StockAP7920
AP7920 masterswitch PDU with power control to its outlets (switchable via web/http)
£ 177.14In Stock
£ 187.56 In StockAP7921
AP7921 masterswitch PDU with power control to its outlets (switchable via web/http) Reset login credentials to apc/apc Reset IP assignemt to DHCP. Email us if you want us to set a static IP instead.
£ 187.56In StockAP7921B
AP7921 masterswitch PDU with power control to its outlets (switchable via web/http) Second generation (B-suffix part number) with built in AP9630 class networking card. Reset login credentials to apc/apcReset IP assignemt to DHCP. Email us if you want us to set a static IP instead.
£ 340.00In Stock
£ 229.24 In StockAP7922
2U Masterswitch PDU, fully tested and working. 12 Month RTB warranty with us. We reset the PDU to manufacturers defaults.They are set to assign an IP via DHCP / BootP handshake.The username and passwords are reset to known values. 1x IEC309-32A (large blue commando plugs) input. Single Phase16x IEC C13/15 (small kettle / d-plug sockets) as output.
£ 229.24In StockAP7922B
2U Masterswitch PDU, fully tested and working. This B suffix variant has the AP9630 class network interface built inand is newer than the none B suffix version. IP via DHCP / BootP handshake.username and password apc 1x IEC309-32A (large blue commando plugs) input. Single Phase16x IEC C13/15 (small kettle / d-plug sockets) as output.
£ 450.00In Stock
£ 104.20 In Stock
£ 425.00 In StockAP8958 PDU
APC AP8958 switched 16A PDU new and unused in original and sealed APC box.This PDU has 7 x C13 outputs and 1 x C19 output.
£ 425.00In Stock
£ 77.91 In StockAP9215RM Control Panel
AP9215 Control panel - used - fully working. We have some brackets - email to check if you need one.
£ 77.91In Stock
£ 48.77 In Stock
£ 31.26 In Stock
£ 34.00 In StockAP9565
A simple 16a PDU power distribution unit - includes rackmount ears 1x C19/20 input 12x C13/14 output
£ 34.00In Stock
£ 13.59 In Stock
£ 588.87 In Stock
£ 156.30 In StockAPC AP7821 Metered PDU
1U Metered PDUFully working12m RTB warrantyWeb interface and front of PDU LCD display shows the total load - also available via the web interface.
£ 156.30In Stock
£ 195.06 In StockAPC AP8953 G2 Masterswitch PDU - 32A
Masterswitch PDU - individual sockets can be powered on an off.Generation 2 - LCD control panel.Staggered start. Input IEC309-32A type (Blue commando Male) Outputs21x C13 output sockets3x C19 output sockets Reset to defaults (username and password apc/apc) We offer an optional firmware upgrade service for these PDU. Order below if needed. Firmware upgrade...
£ 195.06In Stock
£ 140.00 In StockAPC BR24BPG Extended Runtime Module New in...
APC BR24 extended runtime module for APC BR1500GI and BR1200GI UPS.These extended runtime modules are new, unused and supplied in the original manufacturer's box.We have fitted brand new cells and meter-tested the units at the connector.They are ready to install on delivery and carry our 12-month RTB warranty.
£ 140.00In Stock
£ 120.00 In StockBR24BPG
Used add on battery pack (BR24BP) for use with BR1500gi and BR1200gi tower, rebuilt with new battery and with 12m Warranty. Includes the lead to connect to the UPS. Extends run-time of the UPS (multiplies by ~3, so if your original run-time is 10 minutes, expect circa 28 minutes if adding this pack).
£ 120.00In Stock
£ 116.86 In StockBypass Panel 5KVA
Used but good 5KVA bypass panel. Manual Switchgear 12m RTB warranty
£ 116.86In Stock
£ 110.00 In StockBypass Panel 5KVA SBP5000rmi2u
5KVA Manual bypass panel. These can have IEC (C20/C19) type inputs, or cut outs for hard wiring. If you need a particular type contact us before ordering and we'll check stock. They have two options to make it easier to wire to your source and load. The Photos show both types. They can be used in a rack or stood up (any orientation is OK) We do include...
£ 110.00In Stock
£ 95.00 In StockBypass Panel SBP10K 10KVA
Used but good 10KVA bypass panel. Manual Switchgear 12m RTB warranty
£ 95.00In Stock
£ 9.09 In StockC13 to 1x UK3 socket
Power adapter - single c13 to 1x UK3 socket for your device. This lets you connect normal UK plugs to your UPS.
£ 9.09In Stock
£ 14.28 In StockC13 to 4x UK3 socket
Power adapter - single c13 to 4x UK3 sockets for your devices. This lets you connect 4x normal UK plugs to your UPS.
£ 14.28In Stock
£ 7.95 In StockC19 Power lead
C19 1.8M C19 (large square) female 16 amp connector on one end - normally plugged into UPS. UK Wall plug (3 pin / 13A fused) on the other end.
£ 7.95In Stock
£ 6.79 In StockC19-C20 hot to cold lead 16A
16A lead for plugging devices into your UPS Male to Female
£ 6.79In Stock
£ 13.59 In StockCharger - Large
12V Battery charger Size: Large Battery voltage: 12v Charge current: 3.24A Recommended Battery capacity range: 15AH to 25AH Battery topology: Lead acid. Liquid, AGM and Gel compatible. Input voltage 100-240V (UK normal plug and utility voltage) Double indicator LED lights Use with small 12V cells. Fully tested with Our RT12170 / RT12180 / RT12220EV /...
£ 13.59In Stock
£ 11.32 In StockCharger - Medium
12V Battery charger Size: Medium Battery voltage: 12v Charge current: 1.23A Recommended Battery capacity range: 7AH to 12AH Battery topology: Lead acid. Liquid, AGM and Gel compatible. Input voltage 100-240V (UK normal plug and utility voltage) Use with small 12V cells. Fully tested with Our RT1272 RT1290 RT12120 RT12120EV.
£ 11.32In Stock
£ 7.93 In StockCharger - Small
12V Battery charger Size: Small Battery voltage: 12v Charge current: .65A Battery capacity: 4AH to 6AH Battery topology: Lead acid. Liquid, AGM and Gel compatible. Input voltage 100-240V (UK normal plug and utility voltage) Use with small 12V cells. Fully tested with Our RT1245, RT1250 RT1255.
£ 7.93In Stock
£ 93.78 In StockChloride CROSS 32A STS / ATS
32A 230V Static switch.Allows switching between two input sources (automatically, or at user preference, or using the toggle switch) to give uninterrupted power to attached devices. You can set the priority source, dictating where power is preferably drawn from. Tested working. 12m RTB
£ 93.78In Stock
£ 46.89 In StockDell H910n / 0H910P card
H910 networking card TLS problem fixed, and ready for use Flashed with latest firmware You will find the manual for the networkMS card in the download section - its not the exact manual for this card, but we cant find the Dell one, and the network MS is similar so may be of some use.
£ 46.89In Stock
£ 7.59 In Stock
£ 5.89 In StockFirmware Flash for APC 96xx cards
Flash to new firmware on APC cards. Charge is per card. AP9617AP9618AP9619 AP9630AP9631 AP9640AP9641AP9643Must be ordered at the same time as a card, and we only offer this on cards bought from us.
£ 5.89In Stock
£ 5.89 In StockFirmware Flash for HP AF401a cards
Flash to new firmware on APC cards. Charge is per card. Must be ordered at the same time as a card, and we only offer this on cards bought from us. The HP AF401a had some tricky issues with dates - they can be used without flashing but the firmwre flash fixes various issues.
£ 5.89In Stock
£ 9.42 In StockFirmware Flash for SMT and SMC range UPS
APC have released a few firmware revisions on the UPS. No major functionality has changed but it has added support for example connecting to certain NAS and backlight dimming of the LCD panel.
£ 9.42In Stock
£ 11.32 In StockHP EO4504 PDU
A simple 16a PDU power distribution unit made by Hewlett Packard. P/N 228481-006 417583-001. The unit is shown in the photographs with rack-mount ears, but these aren't always available. Please email in advance of ordering if you must have ears. If out of stock, we may supply different ears to those shown, often custom-made from aluminium extrusions.
£ 11.32In Stock
£ 19.48 In StockIEC 309- 16Amp to C19
IEC309 male (to plug into the wall power) c19 Female (to plug into the UPS)
£ 19.48In Stock
£ 520.92 In StockNetbotz 570
APC Netbotz 570 rack camera and sensor monitor.Reset to defaults (login with apc/apc) and DHCP handshake for IP Fully working.
£ 520.92In Stock
£ 38.00 In StockRiello iPlug IP600 UK Pedestal UPS
This Riello iPlug IPG600UK pedestal UPS has had a new battery fitted and been thoroughly tested by UPS technicians.The UPS is ready to use on delivery and carries our 12-month RTB warranty.It has 6 x UK 3 pin plug socket outputs and 2 x IEC c13-14 output sockets.
£ 38.00In Stock
£ 50.00 In StockRiello iPlug IP800 UK Pedestal UPS
This Riello iPlug IPG800UK pedestal UPS has had a new battery fitted and been thoroughly tested by UPS technicians.The UPS is ready to use on delivery and carries our 12-month RTB warranty.It has 6 x UK 3 pin plug socket outputs and 2 x IEC c13-14 output sockets.
£ 50.00In Stock
£ 135.00 In StockSMT2200rmi2u FLT charger
48V UPS system to use as a low power (approx 3.8 Amps), highly intelligent fork lift truck battery charger + conditioner. 1x Charger unit1x C19 input lead1x Anderson Blue plug with 10CM of cable for you to splice your existing FLT charger lead on to. Video in use https://youtu.be/Rb9k-Mk8RPk **You will need to wire your existing charger cable/plug...
£ 135.00In Stock
£ 83.36 In Stock
£ 208.40 In StockSYPM Symmetra Power Module
We have stock of both the power modules and the UPS. So we can fully test them before we ship. 90 Day RTB warranty Fully tested and fully working SYPM4 power module These are for the first generation Symmetra UPS which is a cream plastic shrouded unit as per the photos
£ 208.40In Stock
£ 1,021.16 In StockSYPM10K16H Symmetra Power Module
Tested in a UPS. 90 Day RTB warranty. For use in the Symmetra PX UPS systems
£ 1,021.16In Stock
£ 416.80 In StockSYPM10KH Symmetra Power Module
Tested in a UPS. 90 Day RTB warranty. For use in the Symmetra PX UPS systems
£ 416.80In Stock
£ 573.10 In StockSYPM10KHQ Symmetra Power Module
Tested in a UPS. 90 Day RTB warranty. For use in the Symmetra PX UPS systems. Q revision - updated and backward compatible version of the standard SPYM10KH
£ 573.10In Stock
£ 650.00 In StockSYPM2KU Symmetra Power Module
We have stock of both the power modules and the UPS. So we can fully test them before we ship. 30 Day RTB warranty Fully tested and fully working SYPM2KU power module For use in the Gen2 Symmetra APC UPS systems
£ 650.00In Stock
£ 530.00 In StockSYPM4KI Symmetra Power Module
We have stock of both the power modules and the UPS. So we can fully test them before we ship. 90 Day RTB warranty Fully tested and fully working SYPM4Ki power module For use in the Gen2 Symmetra APC UPS systems
£ 530.00In Stock
£ 296.97 In StockSYPM4KU Symmetra Power Module
We have stock of both the power modules and the UPS. So we can fully test them before we ship. 90 Day RTB warranty Fully tested and fully working SYPM4KU power module For use in the Gen2 Symmetra APC UPS systems
£ 296.97In Stock
£ 540.00 In StockSYSW160KH Static Switch Module
APC OG-SYSW160KH Symmetra static bypass switch - 160 KVA / 160 KW.UK/EU 400V 3 phase UPS static switch - fully working with 3-month RTB warranty.
£ 540.00In Stock
£ 1.00 In Stock£1 Adjustment / test item
Adjustment item to the value of £1. Useful if adding items to the order if we dont have them listed yet. Can be used in Multiples.
£ 1.00In Stock
£ 10.00 In Stock£10 Adjustment / test item
Adjustment item to the value of £10 Useful if adding items to the order if we dont have them listed yet. Can be used in Multiples.
£ 10.00In Stock
