Adjustment item to the value of £1. Useful if adding items to the order...
Brand new 12v 7AH cell, perfect for rebuilding UPS battery banks.These...
Brand new 12v 9AH cell, perfect for rebuilding UPS battery banks.
Brand new 12v 4.5AH cell, perfect for rebuilding UPS battery banks.
APC 1500va Tower UPS with LCD control panel
Warning: Last items in stock!
Provides temporary battery power when the utility power is out.
Provides actual kilowatt hours of usage for energy conscious users.
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
High online efficiency
Reduces utlility costs, generates less heat.
Intuitive LCD interface
Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
Predictive replace battery date
Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
Pure sine wave output on battery - Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
Single switched outlet group - Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.
SmartSlot - Customize UPS capabilities with management cards.
Temperature-compensated battery charging - Prolongs battery life by regulating the charge voltage according to battery temperature.
Output power capacity 1000 Watts / 1.5kVA
Max Configurable Power (Watts) 1000 Watts / 1kVA
Nominal Output Voltage 230V (Configurable for 220 : 230 or 240 nominal output voltage)
Output Voltage Distortion Less than 5% at full load
Output Frequency (sync to mains) 47 - 53 Hz for 50 Hz nominal, 57 - 63 Hz for 60 Hz nominal
Other Output Voltages 220, 240
Topology Line Interactive
Waveform type Sine wave
Output Connections (8x) IEC 320 C13 (Battery Backup)
Nominal Input Voltage 230V
Input frequency 50/60 Hz +/- 3 Hz (auto sensing)
Input Connections IEC-320 C14
Cord Length 1.83 meters
Input voltage range for main operations 160 - 286 V
Input voltage adjustable range for mains operation 151 - 302 V
Number of Power Cords 1
Battery type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time 3 hour(s)
Interface Port(s) SmartSlot , USB
Control panel Multi-function LCD status and control console
Audible Alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Surge energy rating 459 Joules
Filtering Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449
Maximum Height 219 , 21.9 cm
Maximum Width 171 , 17.1 cm
Maximum Depth 439 , 43.9 cm
Shipping weight 22kg
Audible noise at 1 meter from surface of unit 41.0 dBA
Online thermal dissipation 100.0 BTU/hr
No customer reviews for the moment.
APC 1500va Tower UPS with LCD control panel new...
APC 750va Tower UPS with new cells and 12 month...
APC 550 VA tower, with new battery and 12m...
1x Pair of generic rails that will mount a...
AP9630 Networking card Gen2 for APC UPS - fully...
APC SMT3000rmi2u - refurbished. NO FRONT...
RBC 48 - cell kit. No fuse or wiring
APC 3000 rmi2u inc New batteries. Fully...
Networking card Gen2 for APC UPS - fully tested...
APC 1500 VA tower, with new battery and 12m...