APC SMC1000ic Smart Connect UPS

This is the revised unit that has the in-built RJ45 data port for the web comms system called "Smart Connect".

Includes:
1x input cable
2x output cables

• Cold-start capable
  Provides temporary battery power when the utility power is out.
• Energy meter
  Provides actual kilowatt hours of usage for energy conscious users.
• Green mode
  Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
• High online efficiency
  Reduces utility costs, generates less heat.
• Intuitive LCD interface
  Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
• Predictive replace battery date
  Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
• Pure sine wave output on battery
  Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
• Single switched outlet group
  Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.
• SmartConnect
  Innovative, easy to use remote monitoring feature that provides automatic notifications, firmware updates, and advanced support services.
• SmartSlot
  Customize UPS capabilities with management cards.
• Temperature-compensated battery charging
  Prolongs battery life by regulating the charge voltage according to battery temperature.

Main Input Voltage 230 V
Other Input Voltage 220 V 240 V
Main Output Voltage 230 V
Other Output Voltage 220 V 240 V
Rated power in W 600 W
Rated power in VA 1000 VA
Plug standard IEC 320 C14
Nb of power socket outlets 8 IEC 60320 C13
Battery type Lead-acid battery
Colour Black
Height 21.9 cm
Width 17.1 cm
Depth 43.9 cm
Net weight 17.27 kg

APC Smart Connect compatible UPS have an inbuilt RJ45 networking port to connect to your network, so they can signal to the APC EcoStruxture cloud. You can then monitor the UPS of all the UPS that you own, and their statuses from one place (APC site). It also can send you and your service partner (you can use our email address if you want us to be your service partner, but it can be any APC provider) when the UPS has a fault, or a life-cycle warning like cell replacement coming up.

Because the UPS we sell are second hand there is a chance that the ID associated with the UPS is registered elsewhere. So far we are finding most of the units are not registered and you can just link to your own account on arrival. APC have realised this will happen, and have a process in place to handle it - if the UPS is registered elsewhere you can contact APC to change the link to your own account.

https://www.smartconnect-support.apc.com/help/EN/index.html#page/EcoStruxure%20Ready%20Smart-UPS%20Help%20Center/MN05.7.17.html

Its best to have an APC account set up (ie a set of credentials that you can use to log into the APC site to move the smartconnect unit onto. 

The case can be started by phone 08002799254
or online http://www.apc.com/uk/en/support/contact/ask_apc.cfm

You should have to hand:

1/ Our invoice (they require proof of purchase),
2/ Photo of your UPS serial number sticker,
3/ Photo of the SmartConnect QR code and ID/Key sticker,
4/ Photo of the UPS LCD panel showing the “about info” including the MAC address,
5/ The eMail address that you use to log into the APC site (works as your account name)

APC will then delete the existing connection and assign it to your email/account name. If you get stuck email us. We toyed with the idea of doing this process for each UPS to register them to ourselves before shipping them out, but given the majority of the SmartConnect UPS so far have been unregistered, its best to leave them unregistered for the simplest set up customer side.