SMT750ic Smart Connect

APC Smart Connect compatible UPS have an inbuilt RJ45 networking port to connect to your network, so they can signal to the APC EcoStruxture cloud. You can then monitor the UPS of all the UPS that you own, and their statuses from one place (APC site). It also can send you and your service partner (you can use our email address if you want us to be your service partner, but it can be any APC provider) when the UPS has a fault, or a life-cycle warning like cell replacement coming up.

Because the UPS we sell are second hand there is a chance that the ID associated with the UPS is registered elsewhere. So far we are finding most of the units are not registered and you can just link to your own account on arrival. APC have realised this will happen, and have a process in place to handle it - if the UPS is registered elsewhere you can contact APC to change the link to your own account.

https://www.smartconnect-support.apc.com/help/EN/index.html#page/EcoStruxure%20Ready%20Smart-UPS%20Help%20Center/MN05.7.17.html

Its best to have an APC account set up (ie a set of credentials that you can use to log into the APC site to move the smartconnect unit onto. 

The case can be started by phone 08002799254
or online http://www.apc.com/uk/en/support/contact/ask_apc.cfm

You should have to hand:

1/ Our invoice (they require proof of purchase),
2/ Photo of your UPS serial number sticker,
3/ Photo of the SmartConnect QR code and ID/Key sticker,
4/ Photo of the UPS LCD panel showing the “about info” including the MAC address,
5/ The eMail address that you use to log into the APC site (works as your account name)

APC will then delete the existing connection and assign it to your email/account name. If you get stuck email us. We toyed with the idea of doing this process for each UPS to register them to ourselves before shipping them out, but given the majority of the SmartConnect UPS so far have been unregistered, its best to leave them unregistered for the simplest set up customer side.

Max Configurable Power (Watts) 500 Watts / 750VA

• Output Voltage Distortion Less than 5 %
  Output Frequency (sync to mains) 50/60 Hz +/- 3 Hz Sync to mains
  Other Output Voltages 220, 240

  Topology Line interactive
  Waveform type Sine wave

  Transfer Time 6 ms typical : 10 ms maximum

  Input frequency 50/60 Hz +/- 3 Hz Auto-sensing
  Input voltage range for main operations 151 - 302 Adjustable, 160 - 280V

  Battery type Lead-acid battery
  Typical recharge time 3hour(s)
  Replacement Battery RBC48

  Battery Charge Power (Watts) 49 Watts

  Runtime

  Interface Port(s) SmartSlot, USB

  Control panel Multifunction LCD status and control console
  Audible Alarm Alarm when on battery : distinctive low battery alarm : configurable delays
  Emergency Power Off (EPO)

  
  Surge energy rating 540Joules
  Filtering Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449

  
  Maximum Height 161MM, 16.1CM
  Maximum Width 138MM, 13.8CM
  Maximum Depth 369MM, 36.9CM
  Net Weight 11.8KG
  Shipping weight 14.23KG