HP T1500 G3

Part number: af451a
alt number: 5010033-002

Spares # 502537-001

5

Line interactive UPS
Pure sine wave

Input 220/230/240VAC (7.7A Max)

Input connection C13
Output connections 6x C14
1x USB comm port
1x Serial comm port
1x pair telephony RJ45 passthrough

Unit Dimensions
Width 150mm
Depth 390mm
Height 193mm

Weight 18KG

HP 1000 VA tower UPS - fully working - including new cells - 12 month RTB warranty.

These are in very good condition for used units. We have fully tested including loaded drop tests and charge cycles to ensure they are fully working. We install new batteries.

We include
1x UPS (with new cells installed)
1x input lead
2x output Hot->Cold leads

The unit is ready for use immediately on delivery, it just needs to be plugged into the wall power supply, then you plug your devices (computers etc) into the UPS.

It is the perfect small home use UPS. Its hand carry-able and unobtrusively small, and the flat black colour will fit in anywhere. It has a simple interface (just an on button and off button), and comprehensive LED signalling system.

The unit will work anywhere in the UK and EU - and has rear mounted dip switches to set your nominal input voltage, though you can leave these alone and the UPS will still work fine even if they are set incorrectly, just it will be less efficient.

The unit does have a fan but this is quiet when running on mains power. It becomes louder when running from battery, but I think that is OK, as it has a job to do then. I tried to video the UPS so people could hear the noise, but it was not audible on the footage.

We have a lot in stock and will be able to support these units with spares and cheap cell rebuild kits for many years.

I have tested the UPS with my windows 7 Machine, via USB cable (we have some in stock, if you need one drop us an email after ordering and we'll put one in free of charge). It detected and installed the driver automatically and I could then configure the computer to auto shutdown if there is a power failure. You dont need any HP software to enable this, its native to windows, you just need to connect this UPS to your computer with a USB cable. Simple.

If you do want the more advanced HP software, which is a bit bloaty, it can be downloaded free of charge. You need to register. The default username and password are "admin". I included a screenshot in the images. Link follows:

http://h20564.www2.hpe.com/hpsc/swd/public/readIndex?sp4ts.oid=3835632&swLangOid=8&swEnvOid=4063