SMT2200i Tower NLF

The lower battery plastic is not present. This is a purely cosmetic issue and does not effect function or performance. We get some units without these plastics, so do not have one for each UPS we sell. We compensate for this difference by reducing the price. This is a great option if you are only bothered about performance and the unit will not be visible anyway.

http://www.apc.com/shop/lt/en/products/APC-Smart-UPS-2200VA-LCD-230V/P-SMT3000I 


Output power capacity 1.98 KWatts / 2.2 kVA 
Nominal Output Voltage 230V 
Output Voltage Note Configurable for 220 : 230 or 240 nominal output voltage 
Output Voltage Distortion Less than 5% at full load 
Output Frequency (sync to mains) 47 - 53 Hz for 50 Hz nominal, 57 - 63 Hz for 60 Hz nominal 
Topology Line Interactive 
Waveform type Sine wave 
Output Connections 
(8x) IEC 320 C13 (Battery Backup) 
(1x) IEC 320 C19 (Battery Backup) 

Transfer Time 2ms typical 

Nominal Input Voltage 230V 
Input frequency 50/60 Hz +/- 3 Hz (auto sensing) 
Input Connections IEC-320 C20, 
Input voltage range for main operations 160 - 286V 
Input voltage adjustable range for mains operation 151 - 302V 
Number of Power Cords 1Other Input Voltages 220, 240 

Replacement Battery RBC55 


Interface Port(s) SmartSlot , USBControl panel Multi-function LCD status and control console 
Audible Alarm Alarm when on battery : distinctive low battery alarm : configurable delays 
Emergency Power Off (EPO) Yes 
Available SmartSlot™ Interface Quantity 1 

Surge energy rating 365 Joules 
Filtering Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449 

Physical 
Maximum Height 435mm , 43.5CM 
Maximum Width 197mm , 19.7CM 
Maximum Depth 544mm , 54.4CM 
Shipping weight 61.9KG 

Please note that most of the below images are of the 3000VA badged version. Externally the UPS are the same, so we did not re-take photos for the 2200VA that we are selling here.