Test item only. Useful if adding items to the order if we dont have them...
Brand new 12v 9AH cell, perfect for rebuilding UPS battery banks.
1M 10A lead for plugging devices into your UPS
Brand new 12v 4.5AH cell, perfect for rebuilding UPS battery banks.
APC 3000 rmi2u inc New batteries. Fully working. 12m RTB warranty
This unit is incomplete - it does not have the front plastic fascia. This is only a cosmetic issue and does not effect use or performance.
Currently on special offer due to high stock levels.
Warning: Last items in stock!
APC's core current rackmount UPS offering. This is a high power density pure sine wave / line interactive type unit. The unit can be cold started (without mains power) and has the reliability that comes from the market leader especially when refined with the experience learned on the UPS preceding this type. They are the next generation along from the APC 2200 3u units that we have sold and supported for many years. This is one of the most dependable UPS we have used.
These units are all fully tested and fully working and backed by our 12 month RTB warranty. We install new batteries in all units. The batteries will be in the original Metal APC tray.
This unit does not have the front plastic part. This is only a cosmetic issue and does not effect use or performance. We have included a photo of what the UPS looks like from the front - see above and below.
1x UPS with new batteries
1x Input power lead
2x Output power lead
Optional extras that we normally have listed and can be used in this ups are
SNMP Network cards / AP9619 or 9617 for example / rails / temp probes / USB converter cables / extra input/output leads.
APC 3000 VA 2u UPS
Manufacturers spec page / docs available
Max Configurable Power 3000 VA
Nominal Output Voltage 230V
Output Voltage Note Configurable for 220 : 230 or 240 nominal output voltage
Output Voltage Distortion Less than 5% at full load
Output Frequency (sync to mains) 47 - 53 Hz for 50 Hz nominal, 57 - 63 Hz for 60 Hz nominal
Pure Sine wave
8x IEC 320 C13 output sockets
1x IEC 320 C19 output socket
Nominal Input Voltage 230V
Input Frequency 50/60 Hz +/- 3 Hz (auto sensing)
Input Connections IEC-320 C20
Input voltage range for main operations 160 - 286V
Typical battery recharge time 3 hour(s)
Interface Port(s) DB-9 RS-232, SmartSlot, USB
LED status display with LED's for
load and battery bar-graphs
Emergency Power Off (EPO)
Surge energy rating 480 Joules
Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449
Maximum Height 89.00 mm
Maximum Width 483.00 mm
Maximum Depth 660.00 mm
Rack Height 2U
Shipping Weight 54.00 KG
Audible noise at 1 meter from surface of unit 47.00 dBA
Online Thermal Dissipation 400.00 BTU/hr
No customer reviews for the moment.
Upgraded SnapRails. Must be ordered at the same...
1x Pair of generic rails that will mount a...
RBC 6 - cell kit. No fuse.
APC 1500 VA tower, with new battery and 12m...
The front plastic to complete SUA type UPS. We...
Networking card Gen1 for APC UPS, with probe...
RBC43 cell kit to rebuild original RBC43 tray (1x)
APC 3000 XL rack 3u type includes new cells