Networking card Gen1 for APC UPS, with probe and relay interface

More details

£ 33.33

We offer a firmware flash service for these cards. You dont need this and its not hard to update the firmware yourself, but we do have customers request it from time to time:


The AP9619 network interface card simply inserts into any UPS with an available smartslot (rectangular opening on the rear) and provides remote configuration and monitoring capabilities. It also enables the safe shutdown of more than one server from a single UPS.

This card has had its internal configuration reset so that it will find an IP address on your network using BOOTP then DHCP in that order. We can also pre-allocate your nominated IP address free of charge. Simply send us an email after purchase with the below information:

IP : xxx.xxx.xxx.xxx
Subnet : xxx.xxx.xxx.xxx
Gateway: xxx.xxx.xxx.xxx

The cards info page (firmware / software) etc can be found at


RJ45 10/100

Boot-P support
Built-in Web/SNMP management
Event logging
Flash Upgrade
MD5 authentication security
Password Security
SNMP management
Telnet management
Web Management

Height: 1.5" (38 mm)Width: 4.8" (121 mm)Depth: 4.5" (114 mm)
Weight (Approximate): 80 g

Be notified of problems to ensure crucial situations are dealt with in a timely manner.
Customize shut down and reboot of connected equipment and UPSs.
Run command file on shutdown sequence as well as start-up sequence.
Identify problematic trends before they escalate or export the data log for analysis.
Pinpoint the timing and sequence of events leading up to an incident with the event log.
Integrates with InfraStruXure Central
Make device information available to your preferred enterprise management system by forwarding SNMP traps (events)
Browser Accessible
View the user interface with a browser. Provides quick access from anywhere on a secure network.
Flash upgradeable firmware
Install maintenance releases of firmware remotely using FTP.
Reboot equipment remotely
Protection - Password Security
User-selectable password protection prevents unauthorized access.
Three-tier user access Control user access on three levels including read only, device and administrator.
Use an existing radius server to securely authenticate, authorize, and account for your APC device.
PowerChute Network Shutdown - Reliable network-based shutdown of multiple servers

No customer reviews for the moment.

Write a review



Networking card Gen1 for APC UPS, with probe and relay interface

28 other products in the same category: