Test item only. Useful if adding items to the order if we dont have them...
Brand new 12v 9AH cell, perfect for rebuilding UPS battery banks.
Brand new 12v 7AH cell, perfect for rebuilding UPS battery banks.These...
1M 10A lead for plugging devices into your UPS
APC 3000 XL
rack 3u type
includes new cells
Warning: Last items in stock!
Fully working APC 3000 XL UPS - with 12 month RTB warranty.
New cells installed by us.
2x output leads included.
1x Input C19 lead included.
We ship with everything you need to start using on delivery. Simply plug into the wall power, then attach your devices.
As the unit is an XL type it has provision to add extra cells (48VDC rail) via the rear connector. This can be handy for home energy storage, or for example creating massive run times by attaching to a fork lift truck battery bank.
|Output Power Capacity||
2700 Watts / 3000 VA
|Max Configurable Power (Watts)||
2700 Watts / 3000 VA
|Nominal Output Voltage||
|Output Voltage Note||
Configurable for 220 : 230 or 240 nominal output voltage
|Output Voltage Distortion||
Less than 5% at full load
|Output Frequency (sync to mains)||
47 - 53 Hz for 50 Hz nominal , 57 - 63 Hz for 60 Hz nominal
(1) IEC 320 C19 (Battery Backup) , (2) IEC Jumpers (Battery Backup) , (8) IEC 320 C13 (Battery Backup)
|Nominal Input Voltage||
50/60 Hz +/- 3 Hz (auto sensing)
British BS1363A , IEC-320 C20 , Schuko CEE 7 / EU1-16P
|Input voltage range for main operations||
160 - 286 V
|Input voltage adjustable range for mains operation||
151 - 302V
|Other Input Voltages||
220 , 240
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
|Typical recharge time||
DB-9 RS-232 , SmartSlot
|Available SmartSlot™ Interface Quantity||
LED status display with load and battery bar-graphs and On Line : On Battery : Replace Battery : and Overload Indicators
Alarm when on battery : distinctive low battery alarm : configurable delays
|Emergency Power Off (EPO)||
|Surge energy rating||
Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449
|Data Line Protection||
Please note that the photos will be of either 3000 or 2200va type. The units are phsically the same bar the max power rating.
No customer reviews for the moment.
RBC43 cell kit to rebuild original RBC43 tray (1x)
Networking card Gen1 for APC UPS, with probe...
Brand new 12v 24AH EV cell.Designed as an EV...
APC 3000 rmi2u inc New batteries. Fully...
RBC 6 - cell kit. No fuse.
HP 750VA (500w) UPS New cells installed, input...
APC 1500 VA tower, with new battery and 12m...
Test item only. Useful if adding items to the...
AP9630 Networking card Gen2 for APC UPS - fully...
Battery pack to extend runtime of the...