SUA2200rmi2u - NF

APC's core current rackmount UPS offering. This is a high power density pure sine wave / line interactive type unit. The unit can be cold started (without mains power) and has the reliability that comes from the market leader especially when refined with the experience learned on the UPS preceding this type. They are the next generation along from the APC 2200 3u units that we have sold and supported for many years. This is one of the most dependable UPS we have used.

These units are all fully tested and fully working and backed by our 12 month RTB warranty. We install new batteries in all units. The batteries will be in the original Metal APC tray.

This unit does not have the front plastic part. This is only a cosmetic issue and does not effect use or performance. We have included a photo of what the UPS looks like from the front - see above and below.

Included
1x UPS with new batteries
1x Input power lead
2x Output power lead

Optional extras that we normally have listed and can be used in this ups are
SNMP Network cards / AP9619 or 9617 for example / rails / temp probes / USB converter cables / extra input/output leads.

APC 2200 VA 2u UPS

Manufacturers spec page / docs available
https://www.apc.com/products/resource/include/techspec_index.cfm?base_sku=SUA2200rmi2u

Max Configurable Power 1980 Watts / 2200 VA
Nominal Output Voltage 230V
Output Voltage Note Configurable for 220 : 230 or 240 nominal output voltage
Output Voltage Distortion Less than 5% at full load
Output Frequency (sync to mains) 47 - 53 Hz for 50 Hz nominal, 57 - 63 Hz for 60 Hz nominal

Line Interactive
Pure Sine wave

8x IEC 320 C13 output sockets
1x IEC 320 C19 output socket

Input
Nominal Input Voltage 230V
Input Frequency 50/60 Hz +/- 3 Hz (auto sensing)
Input Connections IEC-320 C20
Input voltage range for main operations 160 - 286V

Typical battery recharge time 3 hour(s)

Interface Port(s) DB-9 RS-232, SmartSlot, USB

LED status display with LED's for
load and battery bar-graphs
On Line
On Battery
Replace Battery
Overload

Audible Alarm

Emergency Power Off (EPO)

Surge energy rating 480 Joules

Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449

Physical
Maximum Height 89.00 mm
Maximum Width 483.00 mm
Maximum Depth 660.00 mm
Rack Height 2U
Shipping Weight 54.00 KG

Audible noise at 1 meter from surface of unit 47.00 dBA
Online Thermal Dissipation 400.00 BTU/hr