SUM1500rmxli2u None original CP

SUM1500rmxli2u-NF-NoCP-ALears

Used

APC SUM1500rmi2u UPS with new cells and 12 month warranty.

**We use a none SUM control panel which means the LED/text information does not match the original SUM - see the more details tab for information **

https://www.youtube.com/watch?v=gFheKG65qOQ

The UPS works as normal, it is a signalling issue only.

More details

Warning: Last items in stock!

£ 275.00 tax incl.

We make the ears from Aluminium.

We have run out of the original SUM type control panel plastics. There is another type that we can use, but some of the LED's have changed place. I have made a video showing how this looks. The plastic trim which covers the rest of the front is not included, the picture is a good good guide

www.youtube.com/watch?v=gFheKG65qOQ&feature=youtu.be

The APC SUM series (both 3000 and 1500VA) use a control panel that looks the same as many other UPS.

Unfortunately it is slightly different, there is an LED top left that indicates boost/trim of the input voltage, and this moves where the "running from mains" and "running from battery" LED's are We often dont have an original SUM front, and are offering with a different front, but a consequence is that the LED for on battery is lit when the UPS is running from mains, and the RED fault light will illuminate when running from battery. The UPS will function as normal, and we tape over the icons to give them their right description, but it is certainly our customers must be aware of before ordering. We test as normal and this is a signalling issue only - the UPS will perform identically to a unit with the original front plastic.


They are a high end, modular UPS and its much better to sell cheaply with this issue than scrap them and remove from the worlds capability. It uses a 48V DC battery pack, which can be extended either with SUM48rmxlbp2u EBM units, or with a DIY solution to increase runtime. The UPS are a heavy duty design with long runtimes in mind. The unit is also modular so the battery packs and power modules can be changed without taking the UPS chassis out of the rack.


It can be used in a rack, or on its side as a tower.

Output

Max Configurable Power (Watts)
1.450kWatts / 1500kVA
Output Voltage Note
Configurable for 220 : 230 or 240 nominal output voltage
Efficiency at Full Load
95.0 %
Output Voltage Distortion
Less than 5% at full load
Output Frequency (sync to mains)
47 - 53 Hz for 50 Hz nominal, 57 - 63 Hz for 60 Hz nominal
Topology
Line Interactive
Waveform type
Sine wave
Maximum Output Current
15
Bypass
Internal Bypass (Automatic and Manual)

Input

Input frequency
50/60 Hz +/- 5 Hz (auto sensing)
Input voltage range for main operations
160 - 286V
Input voltage adjustable range for mains operation
151 - 302V
Number of Power Cords
1
Efficiency at Full Load
95.0 %
Maximum Height
86MM, 8.6CM
Maximum Width
432MM, 43.2CM
Maximum Depth
678MM, 67.8CM
Net Weight
46.82KG
Shipping weight
56.82KG
  • Topology Line Interactive

No customer reviews for the moment.

Write a review

SUM1500rmxli2u None original CP

SUM1500rmxli2u None original CP

APC SUM1500rmi2u UPS with new cells and 12 month warranty.

**We use a none SUM control panel which means the LED/text information does not match the original SUM - see the more details tab for information **

https://www.youtube.com/watch?v=gFheKG65qOQ

The UPS works as normal, it is a signalling issue only.

30 other products in the same category: