Adjustment item to the value of £1. Useful if adding items to the order...
Brand new 12v 7AH cell, perfect for rebuilding UPS battery banks.These...
Brand new 12v 9AH cell, perfect for rebuilding UPS battery banks.
Brand new 12v 5AH cell, perfect for rebuilding UPS battery banks.
APC SURT range Double conversion Online topology UPS (pure sinewave) with new cells and 12m RTB warranty.
APC SURT6000xli, refurbished UPS unit.
Fully tested + fully working.
New batteries installed by us.
12 Month RTB warranty with us.
2x output leads.
Warning: Last items in stock!
This is a hardwired input UPS. This means that the UPS is normally hard wired into the input panel, or has a custom cable installed, and when delivered from APC have NO INPUT CABLE. You can see this on the photos below.
We have many cables here if you let us know what you need when ordering we'll do our best to match that (FOC if a cut off we have, or at cost if we need to order parts), or can simply put a normal UK plug on so you can quickly test the unit when it is delivered. The UK plugs are 13 A limited, whereas these UPS can draw more current than 13 Amps. The UPS max current associated with its peak VA power is more like 30 Amps.
Ready for use immediately on delivery.
This is APC's SURT (RT stand for Rack or Tower) UPS offering which has models from 3KVA to 20KVA. It can be used either in a standard rack, or oriented on its side to stand near a desk. The front control panel detaches and rotates 90 so that remains oriented correctly.
The UPS is an online topology unit that generates pure sine wave output. This is preferable to the line interactive and modified wave output units that are cheaper technologies, but have inherent weaknesses. From the APC sales literature for this model line:
The APCTM by Schneider Electric Smart-UPS(TM) RT is a high performance, uninterruptible power
supply (UPS). The UPS provides protection for electronic equipment from utility power blackouts,
brownouts, sags, and surges and small utility fluctuations and large disturbances. The UPS also
provides battery backup power for connected equipment until utility power returns to safe levels or
the batteries are fully discharged.
The unit has:
hot swappable cells (new batteries installed by us)
manual and automatic bypass function.
Manual bypass is selectable by the rear switch or in software
cold start capable
Runtime can be exxtended by adding additional cellbanks
The units are second user and will have cosmetic signs of previous use. We professionally refurbish including paint touch up or complete respray. The grading is A-Grade which we class as as good as you can get without having new.
There are optional network cards for this unit - AP9617/9619/9630 - we can quote at the time of order if you need one.
We have the PDF manuals which we can email to you.
Output Power Capacity 4200 Watts / 6000 VA
Nominal Input Voltage 230V
Input Frequency 50/60 Hz +/- 5 Hz (auto sensing)
Input voltage window for normal operation 160V-280V AC
Nominal Output Voltage 230V
Output Voltage Note Configurable for 220 : 230 or 240 nominal output voltage
Output Voltage Distortion Less than 3%
Output Frequency (sync to mains) 50/60 Hz +/- 3 Hz user adjustable +/- 0.1
Other Output Voltages 220, 240
Crest Factor 3 : 1
Topology Double Conversion Online
Waveform Type Sine wave
Output Connections (8) IEC 320 C13 + (2) IEC 320 C19
Bypass Internal Bypass (Automatic and Manual)
Typical battery recharge time 2.5 Hours
Control panel LED status display with load and battery bar-graphs and On Line : On Battery : Replace
Battery : Overload and Bypass Indicators
Audible Alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Emergency Power Off (EPO) Yes
Surge energy rating 555J Joules
Filtering Full time multi-pole noise
Maximum Height 432.00 mm
Maximum Width 130.00 mm
Maximum Depth 660.00 mm
Rack Height 3U
Shipping Weight ~65 KG
Audible noise at 1 meter from surface of unit 55.00 dBA
Online Thermal Dissipation 1220.00 BTU/hr
APC Smart-UPS RT is a family of high-density, performance UPSs for voice and data networks, medical labs, and light industrial applications. Capable of supporting 10kVA in a 6U rack/tower convertible form, users can support power hungry blade servers or heavily loaded equipment racks. This flexible form factor allows standardization across multiple applications. High power internal chargers allow virtually unlimited additional matching battery packs to comply with aggressive runtime demands of business-critical systems. Customers with harsh power environments looking for extremely tight voltage and frequency regulation, internal bypass, and input power factor correction typical of double conversion online topology will get them in the Smart-UPS RT.
No customer reviews for the moment.