SMT1500rmi2uC

APC SMT1500rmi2uc Rackmount 3KVA UPS, New cells installed 12 month RTB warranty.
Ready for use immediately on delivery.

Includes
1x input cable
2x output cables


This is the revised unit that has the in-built RJ45 data port for the web comms system called "Smart Connect".

APC Smart Connect compatible UPS have an inbuilt RJ45 networking port to connect to your network, so they can signal to the APC EcoStruxture cloud. You can then monitor the UPS of all the UPS that you own, and their statuses from one place (the APC website). It also can send you and your service partner (you can use our email address if you want us to be your service partner, but it can be any APC provider) when the UPS has a fault, or a life-cycle warning like cell replacement coming up.



Because the UPS we sell are second hand there is a chance that the ID associated with the UPS is registered elsewhere. So far we are finding most of the units are not registered and you can just link to your own account on arrival. APC have realised this will happen, and have a process in place to handle it - if the UPS is registered elsewhere you can contact APC to change the link to your own account. We can help you if you get stuck - drop us an email.

You do not need to use the Smart Connect feature. Starting to use the UPS is easy.

1. Unpack and check visually
2. Plug battery connector in
3. Connect mains lead
4. Press on button
5. Attach devices and turn those on.

The UPS is a modern design with a LCD control panel for setup and diagnostics / information. Its a high power density line interactive/pure sine wave type that can be used both in a rack, or as a tower unit.

Max Configurable Power (Watts) 1.0kWatts / 1.5kVA

Output Voltage Distortion Less than 5 %
Output Frequency (sync to mains) 50/60 Hz +/- 3 Hz Sync to mains
Topology Line interactive
Waveform type Sine wave
Transfer Time 6 ms typical : 10 ms maximum

Input frequency 50/60 Hz +/- 3 Hz Auto-sensing
Input voltage range for main operations 151 - 302 Adjustable, 160 - 286V
Other Input Voltages 220 V, 240 V

Typical recharge time 3hour(s)
Replacement Battery APCRBC159
RBC Quantity 1
Battery Charge Power (Watts) 144 Watts

Communications & Management Interface Port(s)
RJ-45 Serial, SmartSlot, USB
Multifunction LCD status and control console

Alarm when on battery : distinctive low battery alarm : configurable delays
Emergency Power Off (EPO)

Surge energy rating 459Joules
Filtering Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449

Maximum Height 86MM, 8.6CM
Maximum Width 432MM, 43.2CM
Maximum Depth 477MM, 47.7CM
Net Weight 26.1KG