Test item only. Useful if adding items to the order if we dont have them...
Brand new 12v 9AH cell, perfect for rebuilding UPS battery banks.
Brand new 12v 7AH cell, perfect for rebuilding UPS battery banks.These...
1M 10A lead for plugging devices into your UPS
APC 3000 rmi2u inc New batteries. Fully working. 12m RTB warranty
Complete with original metal APC battery tray and front fascia.
Warning: Last items in stock!
1x UPS with new batteries
1x Input power lead
2x Output power lead
One picture shows the network cards and rails that can be used with this UPS - they are not included.
APC 3000 VA 2u UPS
Manufacturers spec page / docs available
Max Configurable Power 2700 Watts / 3000 VA
Nominal Output Voltage 230V
Output Voltage Note Configurable for 220 : 230 or 240 nominal output voltage
Output Voltage Distortion Less than 5% at full load
Output Frequency (sync to mains) 47 - 53 Hz for 50 Hz nominal, 57 - 63 Hz for 60 Hz nominal
Pure Sine wave
8x IEC 320 C13 output sockets
1x IEC 320 C19 output socket
Nominal Input Voltage 230V
Input Frequency 50/60 Hz +/- 3 Hz (auto sensing)
Input Connections IEC-320 C20
Input voltage range for main operations 160 - 286V
Typical battery recharge time 3 hour(s)
48VDC cell system
Cold start capable
Interface Port(s) DB-9 RS-232, SmartSlot, USB
LED status display with LED's for
load and battery bar-graphs
Emergency Power Off (EPO)
Surge energy rating 480 Joules
Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449
Maximum Height 89.00 mm
Maximum Width 483.00 mm
Maximum Depth 660.00 mm
Rack Height 2U
Shipping Weight 54.00 KG
Audible noise at 1 meter from surface of unit 47.00 dBA
Online Thermal Dissipation 400.00 BTU/hr
No customer reviews for the moment.
APC 1500va Tower UPS with LCD control panel
Networking card Gen1 for APC UPS, with probe...
Rails for rackmounting APC UPS. Supplying all...
RBC 6 - cell kit. No fuse.
1x Pair of generic rails that will mount a...
Flash to new firmware on APC cards. Charge is...
RBC43 cell kit to rebuild original RBC43 tray (1x)
Networking card Gen1 for APC UPS
RBC11 Battery pack - fully built and ready for...
APC 5000 rackmount with new cells, 12m RTB...