Test item only. Useful if adding items to the order if we dont have them...
Brand new 12v 7AH cell, perfect for rebuilding UPS battery banks.These...
Brand new 12v 9AH cell, perfect for rebuilding UPS battery banks.
1M 10A lead for plugging devices into your UPS
APC SMT220rmi2u - refurbished.
NO FRONT PLASTIC - but we have the plastics available on our site to buy at the same time as the UPS. T
link: Front plastic part
-NO rackmount ears-
LCD control panel is present
Includes 1x input leads and 2x output leads
Warning: Last items in stock!
utput power capacity 1.98 KWatts / 2.2 kVA
Nominal Output Voltage 230V
Output Voltage Note Configurable for 220 : 230 or 240 nominal output voltage
Output Voltage Distortion Less than 5% at full load
Output Frequency (sync to mains) 47 - 53 Hz for 50 Hz nominal, 57 - 63 Hz for 60 Hz nominal
Topology Line Interactive
Waveform type Sine wave
(8x) IEC 320 C13 (Battery Backup) (4x of these are in a switchable group)
(1x) IEC 320 C19 (Battery backup)
Transfer Time 4ms typical 8ms max
Nominal Input Voltage 230V
Input frequency 50/60 Hz +/- 3 Hz (auto sensing)
Input Connections IEC-320 C20
Input voltage range for main operations 160 - 286V
Input voltage adjustable range for mains operation 151 - 302V
Other Input Voltages 220, 240
Recharge time 3 hours
Interface Port(s) RJ-45 Serial , SmartSlot , USB (standard USB-B connector)
Control panel Multi-function LCD status and control console
Audible Alarm Alarm when on battery : distinctive low battery alarm : configurable delays
Emergency Power Off (EPO) Optional
Surge energy rating 375 Joules
Filtering Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449
Maximum Height 86mm , 8.6CM
Maximum Width 480mm , 48.0CM
Maximum Depth 683mm , 68.3CM
Rack Height 2U
Net Weight 42.31KG
No customer reviews for the moment.