AP8981 PDU 3 Phase

Tested, and fully working. Reset to defaults + DHCP Handshake for IP allocation. 12 Month RTB Warranty.

Ready to use on delivery.

These have a 3 phase input plug - lots of people just have single phase. It is possible to use a plug adapter to supply all 3 phases in this unit from your single phase feed using something like an IEC309-32A 1 phase commando plug. Email if you need this.

As these are masterswitches, you can turn off / on individual sockets on the PDU strip via the web interface. We reset this interface to the default (apc/apc) username and password, and to handhake with a DHCP server for an IP on your network.

The total device current, and individual current per phase can be seen on the web page. You can configure alerts, and these Generation 2 devices can have a load shedding policy on overload.

There is a LCD interface on the PDU that can give basic info and status of the device + load.

MFR text :
<<Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur.>>

Main Input Voltage: 400 V 3 phases
PDU type: Switched
Main Output Voltage: 208 V - 230 V
Input Connection Type: IEC 60309 16 A 3P + N + PE (5 pin round red commando)

Output sockets (per phase) 7x IEC13/14 1x IEC19/20 type

Total output sockets
21x IEC13/15
3x IEC19/20

Cable length: 1.83 m

Colour: Black
Height: 179.1 cm
Width: 5.6 cm
Depth: 4.6 cm
Net weight: 7 kg