Adjustment item to the value of £1. Useful if adding items to the order...
Brand new 12v 7AH cell, perfect for rebuilding UPS battery banks.These...
Brand new 12v 9AH cell, perfect for rebuilding UPS battery banks.
Brand new 12v 4.5AH cell, perfect for rebuilding UPS battery banks.
APC SMT1500rmi2u - refurbished.
NO FRONT PLASTIC - but we have the plastics available on our site to buy at the same time as the UPS. The idea is that as the plastic parts cost quite a lot, you get both option - a cheap UPS if no plastic is needed, and the complete UPS if needed.
link: Front plastic part
LCD control panel is present
Includes 1x input leads and 2x output leads
Warning: Last items in stock!
Output power capacity 1000Watts / 1.5KVA
Nominal Output Voltage 230V
Output Voltage Note Configurable for 220 : 230 or 240 nominal output voltage
Output Voltage Distortion Less than 5% at full load
Output Frequency (sync to mains) 47 - 53 Hz for 50 Hz nominal, 57 - 63 Hz for 60 Hz nominal
Topology Line Interactive
Waveform type Sine wave
(4x) IEC 320 C13 (Battery Backup)
Transfer Time 2ms typical
Nominal Input Voltage 230V
Input frequency 50/60 Hz +/- 3 Hz (auto sensing)
Input Connections IEC-320 C14
Input voltage range for main operations 160 - 286V
Input voltage adjustable range for mains operation 151 - 302V
Other Input Voltages 220, 240
Recharge time 3 hours
Interface Port(s) RJ-45 Serial , SmartSlot , USB (standard USB-B connector)
Control panel Multi-function LCD status and control console
Audible Alarm Alarm when on battery : distinctive low battery alarm : configurable delays
Emergency Power Off (EPO) Optional
Surge energy rating 459Joules
Filtering Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449
Maximum Height 89mm , 8.9CM
Maximum Width 432mm , 43.2CM
Maximum Depth 457mm , 45.7CM
Rack Height 2U
Net Weight 28.8KG
No customer reviews for the moment.
Power adapter - single c13 to 4x UK3 sockets...
Brand new 12v 9AH cell, perfect for rebuilding...
AP9630 Networking card Gen2 for APC UPS - fully...
The front plastic to complete SMX/SMT type...
RBC 59 - cell kit. Includes the 4x cells needed...
Automatic transfer switch - C13 input/outputs...
AP7921 masterswitch PDU with power control to...
XL design 1000VA UPS. Heavy duty option to...
RBC7 Battery pack - kit form.
APC 2200 Tower. Fully tested, fully working,...