Test item only. Useful if adding items to the order if we dont have them...
Brand new 12v 9AH cell, perfect for rebuilding UPS battery banks.
Brand new 12v 7AH cell, perfect for rebuilding UPS battery banks.These...
1M 10A lead for plugging devices into your UPS
APC SMT750rmi2u - refurbished.
NO FRONT PLASTIC - but we have the plastics available on our site to buy at the same time as the UPS. The idea is that as the plastic parts cost quite a lot, you get both option - a cheap UPS if no plastic is needed, and the complete UPS if needed.
link: Front plastic part
LED control panel is present
Includes 1x input leads and 2x output leads
Warning: Last items in stock!
Output power capacity 500Watts / 750VA
Nominal Output Voltage 230V
Output Voltage Note Configurable for 220 : 230 or 240 nominal output voltage
Output Voltage Distortion Less than 5% at full load
Output Frequency (sync to mains) 47 - 53 Hz for 50 Hz nominal, 57 - 63 Hz for 60 Hz nominal
Topology Line Interactive
Waveform type Sine wave
(4x) IEC 320 C13 (Battery Backup)
Transfer Time 2ms typical
Nominal Input Voltage 230V
Input frequency 50/60 Hz +/- 3 Hz (auto sensing)
Input Connections IEC-320 C14
Input voltage range for main operations 160 - 286V
Input voltage adjustable range for mains operation 151 - 302V
Other Input Voltages 220, 240
Recharge time 3 hours
Interface Port(s) RJ-45 Serial , SmartSlot , USB (standard USB-B connector)
Control panel Multi-function LCD status and control console
Audible Alarm Alarm when on battery : distinctive low battery alarm : configurable delays
Emergency Power Off (EPO) Optional
Surge energy rating 459Joules
Filtering Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449
Maximum Height 89mm , 8.9CM
Maximum Width 432mm , 43.2CM
Maximum Depth 406mm , 40.6CM
Rack Height 2U
Net Weight 17.27KG
No customer reviews for the moment.