Adjustment item to the value of £1. Useful if adding items to the order...
Brand new 12v 7AH cell, perfect for rebuilding UPS battery banks.These...
Brand new 12v 9AH cell, perfect for rebuilding UPS battery banks.
Brand new 12v 4.5AH cell, perfect for rebuilding UPS battery banks.
APC SUA750rmi2u UPS with new cells in none original cell tray.
Used + fully working.
Warning: Last items in stock!
Used APC 750 2u rack mount UPS with new batteries and 12 month RTB warranty.
This UPS is the modern type with a USB port for communicating to the attached computer / NAS devices. Often we get requests for a UPS to use with NAS, and the people with Synolgoy devices seem to always go for either these or the 750 tower model (which is dearer, but the two have identical performance).
We ship with 1x input cable and 1x output cable.
The batteries are brand new, but we do not use the original APC tray for these due to shortages. We build the loom to be the same as the APC one (including the fuses, of the same rating) and then use lexan to contain the cells in the UPS.
The UPS is a workhorse and shares the same PCB (with fewer components) as the higher power versions versions. It is a very cheap option for a fully working UPS that will connect to your devices via USB, has new cells and warranty. For reference the RBC22 battery pack that this UPS uses, has a current price of £191 from APC. We are supplying the whole UPS, including new cells at a price way below that.
The units are second user and will have cosmetic signs of previous use. We professionally refurbish including paint touch up or complete repay. The grading is A-Grade which we class as as good as you can get without having new.
As per the pictures they do not have the plastic fascia. When in stock we can supply these at an additional cost - inquire at the time of order.
Likewise there are optional network cards for this unit - AP9617/9619/9630 - we can quote at the time of order if you need one. Rack rails also available.
Output power capacity 480Watts / 750VA
Nominal Output Voltage 230V
Output Voltage Note Configurable for 220 : 230 or 240 nominal output voltage
Output Voltage Distortion Less than 5% at full load
Output Frequency (sync to mains) 47 - 53 Hz for 50 Hz nominal, 57 - 63 Hz for 60 Hz nominal
Topology Line Interactive
Waveform type Sine wave
Output Connections (4) IEC 320 C13 (Battery Backup)
Transfer Time 2ms typical : 4ms maximum
Nominal Input Voltage 230V
Input frequency 50/60 Hz +/- 3 Hz (auto sensing)
Input Connections IEC-320 C14
Input voltage range for main operations 160 - 286V
Input voltage adjustable range for mains operation 151 - 302V
Typical recharge time 3hour(s)
Interface Port(s) DB-9 RS-232 , SmartSlot , USB
Control panel LED status display with load and battery bar-graphs and On Line : On Battery : Replace Battery : and Overload Indicators
Alarm when on battery : distinctive low battery alarm : configurable delays
Available SmartSlot™ Interface Quantity 1
Surge energy rating 480Joules
Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449
Maximum Height 89mm , 8.9cm
Maximum Width 432mm , 43.2cm
Maximum Depth 457mm , 45.7cm
Rack Height 2U
Net Weight 21.82kg
Shipping weight 25.11kg
No customer reviews for the moment.
APC 1500 VA Rack 2u UPS with new battery. No...
1M 10A lead for plugging devices into your UPS
APC original Rails and machine screws
Networking card Gen1 for APC UPS
Automatic transfer switch - C13 input/outputs -...
HP 750VA (500w) UPS New cells installed, input...
APC SUA100rmi2u UPS with new cells in none...