APC AP8953 Gen 2 Masterswitch PDU - ZeroU 230V 32A

ttp://www.apc.com/shop/et/en/products/Rack-PDU-2G-Switched-ZeroU-32A-230V-21-C13-3-C19/P-AP8953 

Rack PDU 2G, Switched, ZeroU, 32A, 230V, (21) C13 & (3) C19 

APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. 

Remote outlet level controls allow power on/off functionality for power recycling to remotely reboot equipment and restrict unauthorized use of individual outlets. 

Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. 

Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and low profile circuit breakers. 

User-defined alarms warn of potential circuit overloads before critical IT failures occur. 

Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager. 

Output 

Overload Protection Yes 
Maximum Total Current Draw 32 Amps 

Output Connections 
(3x) IEC 320 C19 (Battery Backup) 
(21x) IEC 320 C13 (Battery Backup) 

Input 

Nominal Input Voltage 200V , 208V , 230V 
Input frequency 50/60 Hz 
Input Connections C20/C19 style - we can provide leads, request preferred type when ordering. 

Acceptable Input Voltage 220-240 VAC 
Number of Power Cords 1 
Maximum Input Current 32 A 
Maximum Line Current 32 A 


Maximum Height 182.9 cm 
Maximum Width 5.6 cm 
Maximum Depth 4.6 cm 
Net Weight 7.59 kg