AP9617

The AP9617 network interface card simply inserts into any UPS with an available smartslot (rectangular opening on the rear) and provides remote configuration and monitoring capabilities. It also enables the safe shutdown of more than one server from a single UPS.

This card has had its internal configuration reset so that it will find an IP address on your network using BOOTP then DHCP in that order. We can also pre-allocate your nominated IP address free of charge. Simply send us an email after purchase with the below information:

IP : xxx.xxx.xxx.xxx
Subnet : xxx.xxx.xxx.xxx
Gateway: xxx.xxx.xxx.xxx


The cards info page (firmware / software) etc can be found at

http://www.apcc.com/resource/include/techspec_index.cfm?base_sku=AP9617

 
Specifications
 
RJ45 10/100

Boot-P support
Built-in Web/SNMP management
Event logging
Flash Upgrade
MD5 authentication security
Password Security
SNMP management
Telnet management
Web Management

Height: 1.5" (38 mm)Width: 4.8" (121 mm)Depth: 4.5" (114 mm)
Weight (Approximate): 80 g