Adjustment item to the value of £1. Useful if adding items to the order...
Brand new 12v 7AH cell, perfect for rebuilding UPS battery banks.These...
Brand new 12v 9AH cell, perfect for rebuilding UPS battery banks.
Brand new 12v 4.5AH cell, perfect for rebuilding UPS battery banks.
Powervar ABCE 1440 UPS, with new battery and 12m Warranty.
Includes input lead and 2x output leads.
Tare being offered cheaply as a function over form solution for tight budgets. We are not going to re paint the cases. The UPS will be fully functioning and the controls and LED will all work.
Warning: Last items in stock!
These UPS were designed by PowerVar as a high quality solution for use in the medical industry. They have low earth leakage current (unusual for UPS) and provide conditioned sine wave power both on mains and battery.
There are two battery isolation plugs on the rear of the UPS. Insert these before plugging in to mains power. The UPS will give a battery warning notice if you do not plug them in first.
It has LED's for both battery capacity, and load monitoring.
It has indicators for the AC input and whether it is boosting/bucking the voltage from mains.
There are three output segments (though there are four segment LED on the face plate, there are only 3 segments on this model) which can be independently via software called PowerVar configuration manager. We dont supply the software and have not looked into this capability.
Cold start capable.
Pure sine wave line interactive UPS type.
4ms Transfer time.
Input 220/230/240 VAC (nominal settable by the rear DIP switches - see the PDF in the download section for the manual on how to set these - p15)
Input 47-53 Hz for 50HZ nominal. UPS matches frequency to mains frequency.
Max Power 1440VA / 1008 watts
6.3 A at 230VAC
Efficiency 94% and 250BTU / Hr thermal output
24V battery system
4x Internal 12v 7AH cells
8h recharge time
No customer reviews for the moment.
Small Inductor based Automatic Voltage...
IEC309 male (to plug into the wall power) c19...
HP 750VA (500w) UPS New cells installed, input...
Power adapter - single c13 to 4x UK3 sockets...
RBC 6 - cell kit. No fuse.
1M 10A lead for plugging devices into your UPS
RBC 48 - cell kit. No fuse or wiring