Eaton 9SX 11000

Used 11KVA UPS, fully tested and fully working with 12 month RTB warranty.
We have installed new cells.

This is an online 11KVA pure sine wave UPS built by EATON. It is a modern and efficient design.

This comprises
1x 9SX 11KVA Power module
1x Battery module for the above (and its connecting cable)
1x Input/output block with bypass switch.


The unit is high power and designed to be hard wired to a power source. 11KVA requires a 50Amp feed. It is a standard UK/EU model that can be used with any single phase source from 200 to 250VAC. We can supply with a small cable pre-wired for rapid testing on delivery purposes, but this must be replaced.

The 11KVA is the largest UPS in the Eaton 9SX range.
The UPS can be used in a rack (no rackmount kit included) or as a tower / floor stander. The LCD panel rotates around 90 degrees so it remains correctly oriented.

11KVA /10KW Max Power
Pure Sine Wave
Online type
(95% efficiency in Online, 98% in high efficiency mode)


Input + output wiring - terminal block (16mm^2 max cable)


Width 440mm
Height 260mm (3U+3U)
Depth 700mm
Weight 86KG

Configuration : Rack/Tower

Electrical Input
Connection : Hardwired - see manual for terminal block layout
Input Voltage Range : 176-276V without derating (up to 100–276V with derating)
Spænding : 200/208/220/230/240/250V
Frequency : 50/60 Hz autoselection
Frequency Range : 40-70 Hz
Short Circuit Current : 150 A
THDI : <5%

Electrical Output
Voltages : 200/208/220/230/240/250V +/– 1%
Voltage THD : < 2%
Output Receptacles : Hardwired - see manual for terminal block layout
Overload Capacity : 102–110% : 120s, 110–125%: 60s, 125–150%: 10s, >150%: 900ms
Efficiency (Normal Mode) : Up to 95% in Online mode, 98% in Hi-Efficiency mode
Output Frequency : 50/60 Hz autoselect, frequency converter as standard
Load Crest Factor : 3:1

Battery
Battery Management : ABM® and Temperature compensated charging method (user selectable), automatic battery test, deep discharge protection, automatic recognition of external battery units.
Extended Battery Capability : EBM

Communications
User Interface : Multilingual graphical LCD display
Communication Ports : 1 USB port, 1 RS232 serial port (USB and RS232 ports cannot be used simultaneously), 4 dry contacts (DB9), 1 mini terminal block for remote On/Off and 1 for remote power Off
Communications Slot : 1 slot for Network-MS card, ModBus-MS or Relay-MS cards.