Top sellers

Information

Riello SDL 10KVA + SUA Batt Pack

SDL100wf-SUABP

Used

10KVA max power. Can be used as a stand alone tower or rack unit.

Comes with a bare metal battery pack as per the photos. We dont have enough of the Riello Battery packs so are supplying with these Modified APC battery packs.

12 month RTB warranty

More details

£ 807.50 tax incl.

-5%

£ 850.00 tax incl.

Riello Online / Pure Sine wave 10KVA UPS, fully working with 12 month RTB warranty.

Fully working and ready for use on delivery.

The input power cable is not normally included (the same as when provided from the manufacturer) because they are often hard wired, or have a particular plug target. If you email us with the type of plug you intend to connect to we'll see if we have a spare lying around to supply free of charge. We can also wire a test lead rated at 10 amps. Same for the output cable, we may have spares or PDU that we can include with the UPS free of charge.

** We have the rackmount ears, but not enough for all units. If you intend to rack mount let us know and we will include these free of charge. If we run out we will make aluminium ears and include those. **




We include the network card, which we reset to a known IP and login credentials. These cards cannot use a DHCP handshake to get an IP, so we will set to something and note that down, or if you email to let us know the IP/SNM/GW details when you order we will set the card to your preferences. It has a simple web interface that contains all the pertinent information.
Input voltage / Load level / battery level / output voltage / battery voltage / runtime / and status on / on battery / bypass / overloaded etc.

We have the user manual for the card for more complex use. See the second half of the manual for the English section:
https://secure.ups-trader.co.uk/index.php?controller=attachment&id_attachment=70




The UPS can be cold started. You can set the output voltage and frequency (220/230/240VAC) (50/60 Hz) from the front interface. This means that the UPS can be used as a voltage and frequency converter.
I made a video of how to do this and put on youtube:

https://youtu.be/wJjhc8NswRY



The UPS is Riello's top of the range design. Its pure sine wave and online/double conversion type. It can also be set to run as a line interactive type to have lower parasitic drain (higher efficiency). They came from a client that needed RFID tags on all gear, and a separate easily visible on/off switch. I thought to remove these but that would leave holes in the front plastics, so have left them on. Some people may even find the second switch of use.

The UPS came without the batter packs that are normally paired with them. There are no cells inside the UPS power module, and it needs a cell pack to work. We have modified another manufacturer's (APC) battery pack system to work with this UPS. The internals are re-worked and we change the output cable to be the native type for Riello. We use 4 fuses internally, and have an isolation plug on the front. When this is removed the battery pack is inert and safe.

The battery pack is built by us and has new cells (20x 12V SLA cells).
The runtime we have seen when testing is:
Runtime with 2400w load ~13 mins
Runtime with 9KW load 2 mins 15 second
Full Manual available here: 

https://secure.ups-trader.co.uk/index.php?controller=attachment&id_attachment=23 


Max power 10000VA / 9000W 

Note - the UPS has an allowable overload of 50% for half a second. General guidance from manufacturers (all of them) is to ensure that nominal continual load is less than 75% of the UPS max. We endorse this. It gives better lifespan, and covers unexpected events like inrush on startup of a device, or low resistance short faults on an attached device not causing a total load drop. 

Input 222/230/240VAC single phase (54A max) 
output 220/230/240VAC single phase (hard wire and IEC plugs on the rear of the UPS) 
50/60Hz 
Power fator >0.98 
Crest factor 3:1 
Distortion with varying load <6% 
with constant load <3% 
Overload 10% 1 Minute 
Overload 50% 0.5 Seconds 

UPS Dimensions 455x175x660 mm (H/W/D) 
Can be used in a rack or tower orientation.
  • Topology On-line / Double conversion

No customer reviews for the moment.

Write a review

Riello SDL 10KVA + SUA Batt Pack

Riello SDL 10KVA + SUA Batt Pack

10KVA max power. Can be used as a stand alone tower or rack unit.

Comes with a bare metal battery pack as per the photos. We dont have enough of the Riello Battery packs so are supplying with these Modified APC battery packs.

12 month RTB warranty

30 other products in the same category: