Adjustment item to the value of £1. Useful if adding items to the order...
Brand new 12v 7AH cell, perfect for rebuilding UPS battery banks.These...
Brand new 12v 9AH cell, perfect for rebuilding UPS battery banks.
Brand new 12v 4.5AH cell, perfect for rebuilding UPS battery banks.
APC 1500 VA Rack 2u UPS with new battery.
B-Grade front included.
In house cell tray built with lexan in place of the APC original metal tray.
Second user but great condition, fully tested and fully working.
12 Months RTB warranty.
Includes 1x input cable and 2x output cables
Warning: Last items in stock!
Refurbished DLA1500RMI2u (rackmount 2u) UPS. This ups has been fully tested and comes with everything you need to start using it. Includes brand new cells pre installed at our warehouse. The cells will be assembled in an in-house container rather than the APC original tray (all wiring and fusing is the same). This unit comes with the front plastic - but it is a B-Grade plastic meaning it will have a problem - cracks, heavy scrapes or retaining ears missing.
Output Power Capacity 980 Watts / 1500 VA
Max Configurable Power 980 Watts / 1500 VA
Nominal Output Voltage 230V
Output Voltage Note Configurable for 220 : 230 or 240 nominal output voltage
Output Voltage Distortion Less than 5% at full load
Output Frequency (sync to mains) 47 - 53 Hz for 50 Hz nominal,57 - 63 Hz for 60 Hz nominal
Crest Factor up to 5 : 1
Waveform Type Sine wave
Output Connections (4) IEC 320 C13
(2) IEC Jumpers
Nominal Input Voltage 230V
Input Frequency 50/60 Hz +/- 3 Hz (auto sensing)
Input Connections IEC-320 C14
Input voltage range for main operations 160 - 286V
Input voltage adjustable range for mains operation 151 - 302V
Batteries & Runtime
Battery Type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time 3 hour(s)
Replacement battery cartridge CURK24, RBC24
RBC™ Quantity 1
Typical Backup Time
at Half Load 26.5 minutes (490 Watts)
Typical Backup Time
at Full Load 7.4 minutes (980 Watts)
Runtime Chart Smart-UPS
Communications & Management
Interface Port(s) DB-9 RS-232,SmartSlot,USB
Available SmartSlot™ Interface Quantity 1
Control panel LED status display with load and battery bar-graphs and On Line : On Battery : Replace Battery : and Overload Indicators
Audible Alarm Alarm when on battery : distinctive low battery alarm : configurable delays
Emergency Power Off (EPO) Optional
Surge Protection and Filtering
Surge energy rating 480 Joules
Filtering Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449
Maximum Height 89.00 mm
Maximum Width 432.00 mm
Maximum depth 457.00 mm
Rack Height 2U
Net Weight 28.64 KG
Shipping Weight 31.91 KG
Shipping Height 254.00 mm
Shipping Width 594.00 mm
Shipping Depth 603.00 mm
Units per Pallet 16.00
Operating Environment 0 - 40 °C
Operating Relative Humidity 0 - 95%
Operating Elevation 0-3000 meters
Storage Temperature -15 - 45 °C
Storage Relative Humidity 0 - 95%
Storage Elevation 0-15000 meters
Audible noise at 1 meter from surface of unit 46 dBA
Online Thermal Dissipation 171 BTU/hr
Regulatory Approvals C-tick,CE,EN 50091-1,EN 50091-2,TUV,VDE
No customer reviews for the moment.
APC BR800i ups with new cells, input lead and...
Networking card Gen1 for APC UPS, with probe...
RJ47 to USB comms cable circa 2m long
APC original Rails and machine screws
Networking card Gen1 for APC UPS
Flash to new firmware on APC cards. Charge is...
1x Pair of generic rails that will mount a...