Adjustment item to the value of £1. Useful if adding items to the order...
Brand new 12v 7AH cell, perfect for rebuilding UPS battery banks.These...
Brand new 12v 9AH cell, perfect for rebuilding UPS battery banks.
Brand new 12v 4.5AH cell, perfect for rebuilding UPS battery banks.
APC 1500 VA Rack 2u UPS with new battery.
No front included.
In house cell tray built with lexan in place of the APC original metal tray.
Second user but great condition, fully tested and fully working.
12 Months RTB warranty.
Includes 1x input cable and 2x output cables
Warning: Last items in stock!
Output Power Capacity 980 Watts / 1500 VA
Max Configurable Power 980 Watts / 1500 VA
Nominal Output Voltage 230V
Output Voltage Note Configurable for 220 : 230 or 240 nominal output voltage
Output Voltage Distortion Less than 5% at full load
Output Frequency (sync to mains) 47 - 53 Hz for 50 Hz nominal,57 - 63 Hz for 60 Hz nominal
Crest Factor up to 5 : 1
Waveform Type Sine wave
Output Connections (4) IEC 320 C13
(2) IEC Jumpers
Nominal Input Voltage 230V
Input Frequency 50/60 Hz +/- 3 Hz (auto sensing)
Input Connections IEC-320 C14
Input voltage range for main operations 160 - 286V
Input voltage adjustable range for mains operation 151 - 302V
Batteries & Runtime
Battery Type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time 3 hour(s)
Replacement battery cartridge CURK24, RBC24
RBC™ Quantity 1
Typical Backup Time
at Half Load 26.5 minutes (490 Watts)
Typical Backup Time
at Full Load 7.4 minutes (980 Watts)
Runtime Chart Smart-UPS
Communications & Management
Interface Port(s) DB-9 RS-232,SmartSlot,USB
Available SmartSlot™ Interface Quantity 1
Control panel LED status display with load and battery bar-graphs and On Line : On Battery : Replace Battery : and Overload Indicators
Audible Alarm Alarm when on battery : distinctive low battery alarm : configurable delays
Emergency Power Off (EPO) Optional
Surge Protection and Filtering
Surge energy rating 480 Joules
Filtering Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449
Maximum Height 89.00 mm
Maximum Width 432.00 mm
Maximum depth 457.00 mm
Rack Height 2U
Net Weight 28.64 KG
Shipping Weight 31.91 KG
Shipping Height 254.00 mm
Shipping Width 594.00 mm
Shipping Depth 603.00 mm
Units per Pallet 16.00
Operating Environment 0 - 40 °C
Operating Relative Humidity 0 - 95%
Operating Elevation 0-3000 meters
Storage Temperature -15 - 45 °C
Storage Relative Humidity 0 - 95%
Storage Elevation 0-15000 meters
Audible noise at 1 meter from surface of unit 46 dBA
Online Thermal Dissipation 171 BTU/hr
Regulatory Approvals C-tick,CE,EN 50091-1,EN 50091-2,TUV,VDE
No customer reviews for the moment.
1M 10A lead for plugging devices into your UPS
AP9630 Networking card Gen2 for APC UPS - fully...
Networking card Gen1 for APC UPS, with probe...
Adjustment item to the value of £1. Useful if...
Networking card Gen1 for APC UPS
HP 750VA (500w) UPS New cells installed, input...
APC SUA100rmi2u UPS with new cells in none...
APC original Rails and machine screws
EMC 750rmi1u - New cells installed. This is the...
APC 1500 VA tower, with new battery and 12m...