APC AP8959eu3 Gen 2 Masterswitch PDU

After testing, we reset the user name and password to apc to allow you to configure easily when it arrives. We also reset the IP configuration to DHCP and BOOTP by default. Once the device is plugged in and connected to your network, you can view the IP it has been assigned by pressing and holding the grey button near the LED number strip.

The input plug on these PDU is a common C19/C20 input socket, making it simple to connect and start using.
A 16A C19 to IEC309 input cable can be purchased here:
https://secure.ups-trader.co.uk/other/272-iec-309-16amp-to-c19.html?search_query=c19&results=89

Alternatively, you could power the PDU with a normal C19 to UK 3 pin 13A lead:
https://secure.ups-trader.co.uk/other/21-c19-power-lead.html?search_query=c19&results=89

User Guide available as a PDF here:
https://secure.ups-trader.co.uk/index.php?controller=attachment&id_attachment=177

Load Capacity 3300VA
Maximum Input Current 20A

Output Connections
3x IEC 60320 C19
21x IEC 60320 C13
Nominal Output Voltage 200V, 208V, 230V
Nominal Input Voltage 200V, 208V, 230V
Input Connections IEC 60320 C20

Output
Overload Protection
No
Maximum Total Current Draw 16 A

Input frequency 50/60 Hz
Acceptable Input Voltage 100 - 240VAC

Load Capacity 3300VA
Maximum Input Current 16A
Regulatory Derated Input Current (North America) 16A

Maximum Height 1791MM, 179.1CM
Maximum Width 56MM, 5.6CM
Maximum Depth 46MM, 4.6CM
Net Weight 5.73KG

Environmental
Operating Temperature -5 - 60 °C
Operating Relative Humidity 5 - 95 %
Operating Elevation 0 - 3048meters